6E 7535.b
2
Technical specification
Mounting of the cell
To ensure a good working of the light sensitive
switch, the cell must not be influenced by
artificial light or direct solar radiation and has
to be sheltered from dust and humidity.
In case of failure of the connection between
the cell and the light sensitive switch, the
indicators S1 and S2 flicker.
24 mois contre tous vices de matières ou de fabrication, à partir de
leur date de production. En cas de défectuosité, le
produit doit être remis au grossiste habituel.
La garantie ne joue que si la procédure de retour via l’installa-
teur et le grossiste est respectée et si après expertise notre ser-
vice contrôle qualité ne détecte pas un défaut dû à une mise en
œuvre et/ou une utilisation non conforme aux règles de l’art.
Les remarques éventuelles expliquant la défectuosité devront
accompagner le produit.
Garantie
F
A warranty period of 24 months is offered on hager products,
from date of manufacture, relating to any material of manufac-
turing defect. If any product is found to be defective it must
be returned via the installer and supplier (wholesaler).
The warranty is withdrawn if :
- after inspection by hager quality control dept the device is
found to have been installed in a manner which is contrary to
IEE wiring regulations and accepted practice within the
industry at the time of installation.
- the procedure for the return of goods has not been followed.
Explanation of defect must be included when returning goods.
Warranty
GB
L
N
auto
200-20 000 lux
2-200 lux
test
on
off
200-20 000 lux
2-200 lux
on
off
S1
S2
1 5
7
3
9 11
16
12
10
14
13 15
2
4
6
8
S1
S2
Schéma de raccordement électrique - electrical connection
EE 003
EE 002
➀
Commutateur du mode de fonctionnement
auto/test.
Switch of operating mode auto/test.
➁
Commutateur 4 positions pour la
sélection de la gamme de luminosité
et pour le forçage.
4-position switch for the selection of the
brightness range and for priority setting.
➂
Voyant pour la visualisation de l'état de
sortie.
Indicator to show output switching.
➃
Potentiomètre pour le réglage du seuil
de luminosité.
Potentiometer to set light level.
EV 100
auto
200-20 000 lux
2-200 lux
test
on
off
200-20 000 lux
2-200 lux
on
off
S1
S2
EE 200
1 5
7
3
9
11
16
12
10
14
13 15
2
4
6
8
1
2
4
3
Description du produit - Product description
Electrical specification
- Voltage rating:
230V
~
+10/-15% 50 Hz
- Consumption: 1,5 VA max.
- Output: 1 voltage free contact/channel
Max. breaking capacity:
•
AC1:
16A 250 V
~
•
Incandescent lamp/ Halogen lamp:
2300 W
•
Fluorescent lamp:
-
uncompensated:
2000 W
-
// compensated (110µF):
1000 W
•
Compact fluo bulb:
10 x 20 W
•
Electronic fluo ballast:
1000 W
Functional characteristics
- 2 sensitivity ranges: 2 to 200 lux,
200 to 20000 lux.
- ON and OFF delay: 30 s.
- working temperature:
•
-30°C to +60°C (cell),
•
-0°C to +45°C (Modular device)
- storage temperature: -20 °C to +60 °C
- Protection class (cell): IP54
- Insulation class (cell): II
- Hysteresis: 10 %
- Max lenght between cell and modular
device: max. 50 m.
- Max lenght between 2 modular devices:
max. 50 m.
Connection capacity
- modular device: 0,5 to 4mm
2
- cell: 0,75 to 2,5 mm
2
Make sure the light sensitive switch is
unplugged before connecting the cell.
