Sliding Door Hardware – 9850 – Pocket Frame
Installation Instructions
I-SD00333
Rev 2, Rev Date: 11/20/17
Page 1 of 6
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325-9995 www.hagerco.com
1
PREPARE HEADER AND ROUGH OPENING
Opening Dimensions From Door Height (Table 1)
D
oor
He
ight
Rough opening height
Bracket Nail Height
Bottom of Track to Floor
6’-7” Door
84-1/2”
81-1/4”
81”
8’-0” Door
101-1/2”
98-1/4”
98”
8”-6” Door
107-1/2”
104-1/4”
104”
Construct the rough opening by following the guidelines in
the table above:
The minimum rough opening height from the finished floor
to the top of the door frame should be 101-1/2” for an 8’-0”
door and adjust accordingly from Table 1 above for different
door heights.
The rough opening width should equal two times the door
width plus 1” (25.4mm). For example, a 30” (76.2 cm) door
multiplied by two equals 60” (152.4 cm) plus 1” equals 61”
(154.94 cm) rough opening width. Refer to Table 2 on page
2 for all other door width dimensions.
Next, plumb the rough studs and ensure that the floor is
level.
CONTENTS
1.
HEADER & TRACK ASSEMBLY
2.
END BRACKET PLAIN
3.
FLOOR PLATE
4.
SPLIT STUD
5.
CARRIER (9827)
6.
QUICK RELEASE PLATE (9610)
7.
DOOR GUIDE SET (9883)
8.
BUMPER KIT (9881)
9.
#8 X 3/4” PPHS
10.
#8 X 1” PPHS
11.
#8 X 5/8” TPHS
12.
PULL
(SOLD SEPERATLY)
1
2
2
6
2
2
1
1
1
8
2
1
3.
4.
2.
6.
5.
1.
9.
8.
11.
7.
10.
