4600 SERIES RIM NARROW STILE EXIT DEVICE
INSTALLATION INSTRUCTION
I
-
ED01162
Hager Companies 139 Victor Street, St. Louis, MO 63104 (800) 325
-
9995 www.hagerco.com
Page
6
of
8
Rev 2, Rev Date: 02/06/2020
5. CUT EXIT DEVICE TO LENGTH
A. Remove head cover from exit device chassis.
B. Align device with mounting holes and measure to determine length to cut device. The clearance between the frame
stop and end of exit device (with end cap removed) is
1
-
5/8”
(See Figure 5
-
1).
C. Cut device square with hack saw or metal cutting saw blade and deburr edges.
Make sure cut is straight or the end cap won
’
t
sit flush.
Be sure to save the spring clip on the dogging plate cover for use on the device. (See Figure 5
-
2).
6. INSTALL DEVICE
A. Mount exit device using the provided screws. If using trim be sure to line up trim actuating shaft (tailpiece) with cam located
on back of exit device chassis.
The clearance is measured from the
frame stop to end the of the device
(without end cap).
Figure 5
-
1
Figure 5
-
2
