3400 Series Electric Cylindrical Lock
Electrical Specifications & Supplemental Instructions
I-LS02201
REV 2, 4/18/2018
27390102
Page 3 of 3
INSTRUCTIONS
Door and Frame Preparations
1.
Use standard instructions and template to prepare door for lock installation.
2.
Door fabricator to provide a 3/4” diameter hole extending 4-3/4” in depth from back edge of 2-1/8” diameter cross bore
hole. This provides room for insertion of the electronics module and wires. For cylindrical locks that only have request to
exit (part number 3480RX), this section of the raceway shall be 3/8” diameter to match Step 3 shown below.
3.
Raceway can then be reduced to 3/8” diameter and continue through door to allow insertion of the electronics module and
wires running between lock and electric hinge.
4.
Provide mortised 3/4” diameter cutout on inside face of door for wire entry access to raceway.
4-3/4”
[121]
