Speedo-Clean
1. Instructions for the user
1.1. Speedo Clean complies with modern technique and the basic requirements of the EC directives.
1.2. The user is responsible for the compliance of all safety instructions and for the specified use.
Everyone using the unit should know how to use Speedo-Clean and be able to operate the unit without any
danger.
2. Safety instructions
2.1. Intended use: Speedo-Clean has been developed and manufactured for the aesthetic surface cleaning of
dentures in order to remove visible defects, i.e. discolouration. Note: The daily cleaning and disinfection of
the dentures carried out by the patient using specific cleaning agents to maintain its functionality cannot be
replaced by the unit.
2.2. Possible danger:
Since the Speedo-Clean unit is operated with a magnetic field, all objects and units that could be influenced
negatively by the magnetic effect should be kept out of a radius of 50 cm distance (pace maker, watches, etc.).
Keep the lid of the cleaning tank closed during operation. If Speedo-Clean Liquid is used, the relevant safety
instructions must be observed.
3. Technical data
Output:
35 watt
Speed:
1.700 rpm
Voltage:
230 V
Frequency:
50/60 Hz
3.1. Function of Speedo-Clean:
The unit removes discoloration and helps to provide a new shine to metal surfaces without damaging the
model. Stainless steel pins in the cleaning tank rotate due to a magnetic field. By adding the cleaning solu-
tion Speedo-Clean Liquid, the concerned model becomes effectively cleaned.
4. Installation and operation
4.1. Installation:
Take Speedo-Clean out of the transport box and find a suitable non-slip surface to install the unit (also see
2.2. possible danger). Please inspect the unit on possible damages. Connect the unit to the mains (230 V).
4.2. Operating devices:
1. Main switch (on the back of the unit)
2. Power supply (on the back of the unit)
3. Timer incl. START/STOP switch
GB Intstruction Manual
2
1
3
Main switch
and power
supply on the
back of the
unit
