42
5
The Answering Machine
5.12 Remote Operation and Remote Query
It is possible to enable certain functions within the Answering Machine
remotely whilst you are out. In order to use this facility you require a tele-
phone installed with DTMF(dual tone multi-frequency or Touch Tone dial-
ling) or a DTMF transmitter. Access to the control of the Answering
Machine is via the PIN protecting the base-set (default value 0000). If
remote access is approved, but the Answering Machine is switched off (no
LED), the caller will hear a multiple tone after approx. 60 seconds. After this
request access to the remote query/interrogation can follow. Use the follo-
wing procedure to set up remote access.
Select
VOICE SET UP
in the
VOICE
menu
press
OK Key
select menu item
REMOTE=OFF
or
REMOTE=ON
By pressing the
OK Key
the relevant
mode will switch between on/off. The
display text shows the actual current
mode.
Complete the installation with the
ON/OFF key
or select another menu
item
5.13 Using remote operation /remote query
Dial telephone number
With the Answering Machine switched off there is a multiple tone sequence
for approx 1 minute. If the Answering Machine is switched on the greeting
will start after the pre-programmed number of rings
During the greeting or after the multiple tone sequence enter the digit 0.
After hearing 3 signal tones:-
enter the PIN assigned to the base set and Answering Machine.
Two signal tones are heard on successfully entering the PIN. A maximum of
2 attempts is allowed, after which the connection with the HomeHandy Pìco
voice
base-set is terminated.
/