ii
NOTICE - IMPORTANT SAFETY INFORMATION
C A U T I O N
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
!
1.
Read Instructions
All the safety and operating instructions of your Hafler equip-
ment should be read before power is applied to the equipment.
2.
Retain Owner's Manual
These safety and operating instructions should be retained for
future reference.
3.
HEED WARNINGS
All warnings on the equipment and in the operating instruc-
tions are important and should be followed.
4.
FOLLOW INSTRUCTIONS
All operating and use instructions are important and should be
followed.
5.
HEAT
The equipment should be kept away from areas of high tem-
perature, i.e., heater vents, radiators, stoves/ovens, fireplaces,
etc.
6.
VENTILATION
The equipment should be used in an area suitable for proper
ventilation. Care should be taken not to impede airflow in and
around the cabinet. Do not mount on a carpeted shelf or in a
sealed enclosure. Allow for proper clearance above the equip-
ment.
7.
WATER AND MOISTURE
The equipment should not be used in or around water, such as
a bathtub, sink, or swimming area. Also, the equipment should
not be used in areas prone to flooding, such as a basement.
8.
POWER SOURCES
The equipment should be connected only to a power source of
the same voltage and frequency as that listed on the rear panel
above the power cord entry point.
9.
POWER CORD PROTECTION
Power cords should be arranged so they do not interfere with
the movement of objects in the room: people, fan blades, util-
ity carts, etc. Also, care should be taken that the cord is not
pinched or cut, and placed so it is not in danger of being
pinched or cut, as in under a rug, around a tight corner, etc.
10. POWER CORD GROUNDING
The power supply cord is of a three wire grounded type,
designed to reduce the risk of electric shock sustained from a
live cabinet. It is assumed to be of suitable length for most uses
of the equipment. The use of extension cords and power strips
is discouraged unless they are of suitable rating to deliver the
required total current for safe operation of all connected
equipment. Furthermore, extension cords or power strips must
provide the same three wire grounded connection. It is impor-
tant that the blades of the equipment’s plug be able to fully insert
into the mating receptacle. Never remove the round grounding
pin on the plug in an attempt to mate to a two wire unground-
ed receptacle: use a grounding adapter with the grounding tab or
wire suitably connected to earth ground.
11. NON-USE PERIODS
During periods of extended non-use, the power cord should be
unplugged from the power source.
12. CLEANING
The equipment should be cleaned only as detailed in the operat-
ing instructions.
13. OBJECT AND LIQUID ENTRY
Care should be taken so that objects and/or liquids, such as
cleaning fluids or beverages, are not spilled into the enclosure of
the equipment.
14. DAMAGE REQUIRING SERVICE
Hafler equipment should be serviced by qualified service per-
sonnel when:
A. The power supply cord or plug has been damaged, or
B. Objects have fallen, or liquid has been spilled into the
equipment, or
C. The equipment has been exposed to rain, or
D. The equipment does not appear to operate normally or
exhibits a marked change in performance, or
E. The equipment has been dropped, or the enclosure has
been damaged.
15. SERVICING
The user should not attempt to service the equipment beyond
that which is described in the operating instructions. All other serv-
ice should be referred to qualified service personnel.
16. CARTS AND STANDS
The equipment should be used with carts or stands only of
sufficient strength and stability for the use intended.
An equipment and cart combination should be moved with
care. Quick stops and starts, excessive force, and uneven sur
faces.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated "dangerous volt-
age" within the product's enclosure, that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user of the presence of important operating and maintenance (servic-
ing) instructions in the literature accompanying the appliance.
Summary of Contents for 1600
Page 1: ......
