Hafele WTC 200, Mounting Instructions

Page: 28 / 57

Assembly and installation
28
Fig. 162: Connections at rear of reader
4.> Connect connecting cable to clamps of reader.
Ensure that the lead that is connected to A at the controller is also connected to A at
the reader. The same also applies to the lead that has been connected to B.
Fig. 17: Rear of reader with cable
5.> Screw cover back onto rear of reader (Fig. Fehler! Verweisquelle konnte nicht gefunden werden. /1).
When doing this, lead out the cables at the padded cable ducts at the side (Fig. Fehler! Verweisquelle
konnte nicht gefunden werden. /2).
6.>
NOTE! Risk of damage to cables!
Carefully slide reader and cables into switch box. Ensure that the cables are not trapped.
7.> Push reader into the frame of the reader until it has engaged in the support rails at the frame at both sides.
Fig. 18: Reader with frame
8.> Restore power supply of controller.