6
Body Assembly
Arm pin outer
position for more
load on table
Arm pin inner
position for less
load on table
RIGHT SIDE SHOWN
Do the same with left side symmetrically
A
B
C
Attach the gas spring to mechanism arm by snapping over
ball pin.
1
2
Attach other side (blade side) of gas spring to
lower support (A3) using lower support pin
(A4), insert cotter pins (A5) and bend ends.
Cotter pin
3
Attach arm plate (A1) to the body side
using 8 sets of carriage bolts, washer
and nuts. Make sure the hook on arm
is facing upwards.
H3
4
Attach lower support (A3) to body side
using 2 sets of the carriage bolts,
washer and nuts.
Repeat steps above for the
opposite side.
A2
1
A3
4
A1
H3
H3
3
Hook to face upwards
Right hand side shown
