12
2
3
Place the bed head assembly on top of desk top assembly as
shown below, and align holes for link pivot - see detail 2
below.
From the outside introduce the link pivot into holes as
shown, slightly raising the bed assembly to align holes.
Attach other plate onto the link pivot securely with remaining
screws. Make sure all screws are tight.
2
3
HEAVY - BE CAREFUL
4
Slide the body assembly over the bed assembly taking
caution that the arm mechanism does not scratch the sides
of body.
Align holes for trunion bushings (A8), install trunion bolt and
loosely tighten until other side is aligned and affixed.
Strongly tighten both trunion bolts.
