Clear User Pin Code
This feature returns the user code back the factory default setting of 0000. It does not
reset any other mode or feature of the lock.
There is a 60 second programming time limit to each step. If you time out or make an
error, programming will end and you will need to restart from step 1.
1. We suggest reading through instructions prior to beginning programming
2. Press and hold the Receiver Latch learn button until the yellow LED begins a
three blink
pattern
3. Enter the Supervisor pin code and press the
Unlock
button
4. Enter
8888
and press the
Lock
button
5. If successful the green LED will flash twice on the Receiver Latch
6. Continue programming or enter
9999
followed by pressing the
Lock
button to exit Learn Mode
7. Test lock function to make sure user default setting is restored. Lock can now
be programmed with a new user code
9
