6
For Glass model and T shape model
•
By Put the upper chimney into lower chimney .Then pulling out the upper chimneyup-
wards. Adjustto reach the height required.
•
Sliding the chimney to adjust the chimney height. When the height you required is reached, then
hang the fixing hole to the fixing screws as showed in below pictures.
•
Drill 2x8mm holes to accommodate the plate II. Screw and tighten the plate II onto the wall with
2 screws provided.Assembly the chimney onto the unit and fix it with 2 screws.
Warning:
Failure to install the screws or fixing device in accordance with these instructions may
result in electrical hazards.
Screw (4mmx30mm)
Screw (4mmx8mm)
Rawl plug
Plate II
Upper chimney
Lower chimney
