5
2. Installation (Vent outside):
Attention! Observe the warning in the instruction sheet concerning the operation of the appliance
when air is discharged from the room.
When the range hood and appliance supplied with energy other than electricity are simultaneously in
operation, the negative pressure in the room must be not exceed 4 Pa (4x10
-5
Bar)
●
Drill 3 x 8mm holes to accommodate the bracket. Screw and tighten the bracket onto the wall
with the screws & screw plugs provided.
●
Leave up the cooker hood and hang onto the wall bracket hook.
●
Chimney installation.
●
Fix the one-way-valve to the air outlet of the cooker hood. Then, attached the exhaust pipe onto
the one-way-valve as shown below.
Exhaust pipe
Cooker hood
Holes on wall
Screw plug
Wall bracket
Screw
(4mm x30mm)
