14
OPERATION
Multi Circuit Activation (Optional)
Residual Heat Indicator
The control unit may trigger • depending on the type • dual circuit or triple circuit. Multi Cir
-
cuits are switched automatically on after activating a cooking zone. Activation/Deactivation
of dual circuit HL
By actuating the dual-circuit key “3” the respective double or outer circuit is deactivated.
Re-actuating the dualcircuit key “3” activates the outer circuit again, An active double or
outer circuit is also shown by the assigned LED “11” is statically illuminated.
Activation/Deactivation of triple circuit HL For triple-circuit the following operation proce
-
dure is provided:
- By actuating the multi-circuit key “3” the respective double and triple circuits of an active
cooking zone are deactivated.
- Re-actuating the multi circuit key “3” activates the first outer circuit and the assigned LED
“11” illuminates again.
- A second actuation of the multi circuit key “3” activates the second outer circuit and the
assigned LED “11” illuminates again.
The determination of how long a cooking zone has residual heat after operation and switch
off • which may lead to burnings when contacting • is calculated. Status is calculated de
-
pending on: Selected power stage (•“0” bis “•9”) On/Off Time of the Relays
The residual heat indication of each cooking zone remains activated until the calculated
temperature is smaller than + 60
o
•C.
onboiling stage).
The onboiling stage may be changed within 15 sec after activation without switching off the
parboiling boost. Therefore, the cooking zone is to be selected and the relevant cooking
zone is to be set afterwards.
In case of a selection after 15 sec a lower cooking stage may be set; automatic onbboiling
is switsched of. a higher onboiling stage may be selected; this leads to the parboiling time
being automatically brought in line with the currently selected onboiling stage
