13
OPERATION
ON/OFF Cooking Zone
Switching Off a single cooking zone:
Power Stages
In case of On-state of the TC a cooking zone may be selected by touching the dedicated
display (Select-Sensors “8”). The respective display changes to a steady display dot and
“0“ instead of “H“ • in case of a hot cooking zone-. On all other cooking zone displays the
dot expires.
That followed a cooking level may be set by using the Slider area. Thus switches the re-
spective cooking zone on. End stops are •9“ (right side) and •0“ (left side).
A single cooking zone may be switched off by selecting and setting cooking level to [0]. In
case of an optic warning for hot cooking zones [H] this is displayed in alternation with [0]
and the synchronously display dot. After the TC is switched Off the display remains black
respectively [H] is displayed for an optic warning for hot cooking zone.
Switching Off all cooking zones:
Immediately switching off all cooking zones is always possible by using the ON/OFF key. [H]
possibly appears on all hot cooking zones. All other cooking zone displays remain black.
The power of the cooking zone is adjustable in 9 different stages; the respective stage is
displayed ([1“] to [9]) via LED seven-segment-displays.
Automatic Parboiling (selectable)
When Automatic parboiling is activated, the power of the cooking zone is switched to 100%
for a period of time depending on the selected onboiling stage. As soon as the parboiling
time is over, the preselected onboiling stage is valid again.
Procedure to start Automatic parboiling:
The control unit is switched on and a cooking zone is selected.
After setting cooking stage “9“ Automatic parboiling is activated by pressing at the right
slider sensor. “A” appears on the display immidiately.
Now the required onboiling stage is selected via Slider area . The “A” symbol appears after
3 sec upon releasing the key alternating with the onboiling stage (500 msec •A“ and 1.5 sec