Häfele HC-IF77D, User Manual

Page: 22 / 52

22
CLEANING AND MAINTENANCE
Proper routine maintenance and cleaning of the appliance can significantly extend its trou -
ble-free operation.
When cleaning induction hobs, the same principles apply as for glass surfaces. Do not use
under any circumstances any abrasive or caustic cleaners or scouring powders or pads!
Do not use steam or pressure cleaners
Cleaning after each use
•
•Wipe light stains with a damp cloth without
detergent. The use of dishwashing liquid may
cause a bluish surface discolouration. These
persistent stains cannot always be removed
right away, even using a special cleaner.
•
•Firmly adhering dirt can be carefully removed
with a scraper. Then wipe the cooking surface
with a damp cloth.
Scraper to clean the hob
OPERATION
When switching from one cooking zone to another, the timer display indicates the current
timer value of the respective cooking zone. Timer settings of other cooking zones stay ac-
tive. Further setting is like with the stand-alone timer In case of more than one active timer
the display indicates the lowest timer value (after 10s deselection time).
After expiring of the set time an acoustic signal is given and the timer display flashes •00“.
The related timer LED is blinking synchronously. The programmed cooking zone is cut-off,
a permanent “0” is displayed and the cooking zone is selected automatically. After 10 sec
(deselection time) a permanent “H“ is displayed on a •hot“cooking zone. Otherwise, the
symbol “0“ is indicated.
The acoustic signal and the blinking of the cooking zone timer Led is terminated
- after 2 min and/or
- by actuating any key.
Thereafter timer display stops extinguishes and the cooking zone stays unselected. Behav-
ior of the cooking zone specific timer is similar to the stand alone timer. In case of a timer
is programmed for a cooking zone the operating time limitation is dependent of the timer
value and not of the standard table value.