Häfele HC-I773D, User Manual

Page: 21 / 52

21
OPERATION
The acoustic signal is terminated:
- after 2 min and/or
- by actuating any key.
Thereafter timer display stops blinking and extinguishes. Possible optic warnings for hot
cooking zones [H] are displayed permanently
By pressing the ON/OFF key “1”, the control unit may be switched from •purely timer op
-
eration“ to cooking zone at any time -with or without an activated Stand-Alone timer -.
Switching back to TC active mode with an active Stand-Alone timer the timer is selected
first (decimal dot on timer display flashes). After a cooking zone is selected, the decimal dot
disappears from the timer display and a steady decimal dot on the cooking zone display
flashes on. When switching off the control unit by ON/OFF key “1”, the Stand-Alone timer • if
still in operation -is also switched off.
Cooking zone specific timer programming: Switching on the TC enables timer setting
for dedicated cooking zones. By actuating a cooking zone (cooking zone stage > 0) fol -
lowed by selecting the timer display (within 10 sec) a timer value may be assigned to the
cooking zone as a cut-off function. The LED around the timer “9” indicates which cooking
zone the timer had been activated for.
As soon as the timer is selected the according LED is blinking and the dot in the timer
display is flashing permanently. In case of a cooking zone is selected thereafter, the dot
extinguishes and the LED stops blinking.
When switching from one cooking zone to another, the timer display indicates the current
timer value of the respective cooking zone. Timer settings of other cooking zones stay ac-
tive. Further setting is like with the stand-alone timer In case of more than one active timer
the display indicates the lowest timer value (after 10s deselection time).
After expiring of the set time an acoustic signal is given and the timer display flashes •00“.
The related timer LED is blinking synchronously. The programmed cooking zone is cut-off,
a permanent “0” is displayed and the cooking zone is selected automatically. After 10 sec
(deselection time) a permanent “H“ is displayed on a •hot“cooking zone. Otherwise, the
symbol “0“ is indicated.
The acoustic signal and the blinking of the cooking zone timer Led is terminated
- after 2 min and/or
- by actuating any key.
Thereafter timer display stops extinguishes and the cooking zone stays unselected. Behav-
ior of the cooking zone specific timer is similar to the stand alone timer. In case of a timer
is programmed for a cooking zone the operating time limitation is dependent of the timer
value and not of the standard table value.