Häfele HC-I773D, User Manual

Page: 18 / 52

18
OPERATION
Automatic Parboiling (selectable)
Booster function “P”
Residual Heat Indicator
When Automatic parboiling is activated, the power of the cooking zone is
switched to 100% for a period of time depending on the selected onboiling
stage. As soon as the parboiling time is over, the preselected onboiling
stage is valid again.
Procedure to start Automatic parboiling:
The control unit is switched on and a cooking zone is selected.
After setting cooking stage “9“ Automatic parboiling is activated by pressing at the right
slider sensor. “A” appears on the display immidiately.
Now the required onboiling stage is selected via Slider area . The “A” symbol appears after
3 sec upon releasing the key alternating with the onboiling stage (500 msec •A“ and 1.5 sec
onboiling stage).
The onboiling stage may be changed within 15 sec after activation without switching off the
parboiling boost. Therefore, the cooking zone is to be selected and the relevant cooking
zone is to be set afterwards.
In case of a selection after 15 sec a lower cooking stage may be set; automatic onbboiling
is switsched of. a higher onboiling stage may be selected; this leads to the parboiling time
being automatically brought in line with the currently selected onboiling stage
After selection of a respective cooking zone, the power function can be selected directly via
the power function key “3”. By means of this function certain cooking zones are enabled to
receive power over the nominal. If the desired cooking zone has the capacity to activate the
booster, the display shows a “P“ symbol. The boosting time is limited to 5 min to protect
cooking utensils. After the booster is switched off automatically, the cooking zone continues
operation on power level “9”. The booster can be reactivated after some minutes.
In case that the pan is removed from the cooking zone during boosting, the boosting func-
tion remains active and boosting time continues.
The determination of how long a cooking zone has residual heat after operation and switch
off • which may lead to burnings when contacting • is calculated.
Status is calculated depending on: Selected power stage (•“0” bis “•9”) On/Off Time of the
Relays
The residual heat indication of each cooking zone remains activated until the calculated
temperature is smaller than + 60
o
•C.