21
Timer function (optional)
Switching-OFF/changing the timer
The timer function is realized in two versions:
•- Stand-alone timer 1..99 min: sound signal when the time is over (= minute minder). This
function is only available when the cooktop is not in operation, i.e. when there is no cooking.
•- Cooking zone timer 1..99 min: sound signal when the time is over, four cooking zones can
be programmed independently.
Timer as minute minder (stand-alone):
•- If the control is ON and no cooking zone selected, the standalonetimer can be used by
simultaneously operating MINUS (2) and PLUS (3) keys.
•- A djustment range (0-99min), it can be set in 1-minute steps with any key, starting at 1 up
to 99 (end stop) with the minus-key starting at 99 down to 0 (end stop)
•- Continuous activation of the plusor minus-key results in a dynamic increase of the adjust
-
ment speed up to maximum value without sound signal.
•- when the plus- or minus key is released in the meantime, the adjustment speed starts
again from a (low) initial value.
•- a djustment can be made with a continously activated plus- or minus-key or by tip-oper
-
ation (with sound signal) After the timer is set the time runs down according to the adjust-
ment. When the time is over there is a sound signal and the timer display blinks.
The sound signal will be stopped
•- automatically after 2 minutes and/or
•- by operating any key.
Then the blinking of the timer displays stops and the display extinguishes.
•- The timer can be changed or switched-off anytime by simultaneously operating MINUS
(2) and PLUS (3) keys. (with sound signal). The timer will be switched off by counting down
to “0” with the minus-key.
For seconds the timer display remains at “0“ before it will be switched-off.
•- If the control will be switched- ON by means of the Power-key, the stand-alone timer will
be switched-off also.
OPERATION
After a renewed switching-ON by means of the ON/OFF key all displays show •0“, the
display dots are blinking and the control is ready for cooking. If a cooking zone is in “hot”
mode, “0” and “H” will be alternately displayed.
Audible signal (buzzer)
While the control is in operation the following activities will be signaled by means of a buzz-
er:
•- normal key activation with a short sound signal.
•- continuous operation of keys over a longer period of time (10 seconds) with a longer,
intermittent sound signal.
