2
Instructions
1
Install lights per instructions supplied
with lights.
2
Plug lights into mounting block
A
.
3
Plug Mounting Block and secondary
transformer leads together
B
.
4
Plug transformer into standard
120V outlet
C
.
WARNING!
-
Transformer has a 60 Watt Capacity.
DO NOT OVERLOAD.
Any combination of lights from 10 to 60
Watts can be used.
-
To insure UL® and CSA® listing, use as
a complete system with Häfele Light. Do
not combine with other systems.
-
Lights may be switched on and off on
either the primary or secondary side.
Transformer is dimmable with an
electronic low voltage dimmer switch
connected to the primary side only.
-
Lights come equipped with a 2 meter
(6’6”) lead. Additional leads may
decrease light output.
A
B
C
C
B
823.24.409
823.24.445
823.24.436
With 13” Cord.
Important Safety Instructions:
When installing or using Häfele Lighting Systems, basic safety precautions should be
followed including:
1
Read all instructions before installation.
2
Do not install in damp or wet locations.
3
Do not open or modify transformer.
4
To reduce the risk of fire and electrical shock, do not attempt
to connect power tools, extension cords, appliances etc. to
the transformer.
5
For indoor use only.
