732.26.671
732.26.671
HDE KE1 16.12.2022
HDE KE1 16.12.2022
17
[1639723]
[1639723]
en
4.3 Reset
Note
Property damage caused by structural obstacles
It must be possible to perform a reset at any time.
>
Remove structural obstacles that could hinder a reset.
>
In order to start up, perform a reset of the lifting device using the control unit.
>
Move the lifting device (table) to the lowest position (1).
>
Press the ‘DOWN’ button (‘
’) for approximately 6 seconds until the column briefly moves
down and up again (2).
6s
2
1
Fig.: Commissioning/reset
5. Operation
Pay attention to the following during operation:
>
Do not use the lifting device for longer than 2 minutes at a time with a full load. Do not use it
for 18 minutes afterwards.
>
Always maintain visual contact with the lifting device (e.g. electric table base) when raising
and lowering.
>
Do not block the movement area of the lifting device.
>
Only move the lift if the elements of the furniture item, such as drawers, are closed.
>
Keep hands, long hair and loose clothing out of the movement area of the lifting device.
Danger zone!
ins-src-732.26.671.indb 17
16.12.2022 11:37:32
