15
H
D
E
0
4
/2
016
73
2.2
6
.6
71
4. Installing the con-
trol unit
4.1 Installing the control unit
The control unit is intended for installation beneath the cover or the table top.
» Determine a suitable position in the relevant area of the furniture item.
» Drill holes.
» Secure control unit using screws (max. 40 Ncm).
4.2 Connecting the control unit
In order to connect the control unit, refer to the relevant chapter of the lifting device
installation instructions (e.g. adjustable table).
• Route cables properly and secure.
Fig.: Installing the control unit
NOTE
Damage caused by excessive use of force
The control unit can be damaged by using electric tools (e.g. cordless screwdriv-
ers).
• Do not use electric tools to tighten the screws.
• The torque must not exceed 40 Ncm.
WARNING
Risk of injury from defective components!
The use of defective components can lead to serious injuries during oper-
ation.
• If the control element is visibly damaged, it must not be installed.
• Repairs must be carried out by a professional.
Summary of Contents for 633.03.298
Page 11: ...11 HDE 04 2016 732 26 671 ...
