INSTALLING THE DOOR BRACKETS
K
x12
The door brackets must point downward. Install the door
brackets in alignment with the support bars on the bed
frame.
Top
Bottom
S
x 48
Do not mount handle lower than approximately 1/3 of the
way down from the top of the door as this could result in the
door being harder to open.
197mm
7
3/4”
197mm
7
3/4”
Measurements for the right side
of the panel use the top right hole
on the backside of the doors.
Use top left hole for left side
(see image below).
600mm
23
5/8”
413mm
16
1/4”
600mm
23
5/8”
x2 doors
7
INSTALLING THE HANDLES
8
It is not recommended to use knobs on wall bed doors.
Please use handles in order to have more anchor points into
the door panel and avoid injuries that may be caused by the
knobs detaching from the door panels.
Install handles according to manufacturer’s instructions.
The door handles should be installed prior to mounting the doors in order to help hold the panels. Decorative handles not included.
Install the handle on the outside of the door during this step. Handle should be
mounted at a height to comfortably allow the user to pull the bed down.
MAKE SURE TO MIRROR
measurement for left and right doors.
Vertical handle
Knob
x2
Horizontal handle
x2
Right door
(once installed)
Left door
(once installed)
Handles to be installed in
upper 1/3 of the doors
Do not put handle screw hole closer
than 65mm (2.5in) from the edge of
each door panel to avoid interference
with other components.
Bottom
Height adjustable screw
32mm
1
1/4”
32mm
1
1/4”
Page 11
