Hafco W618, Operator'S Manual

Page: 2 / 17

2
PRODUCT SPECIFICATIONS
Jointer / Planer
Motor 240V 50Hz 1100W
Max Cutting Width 153mm
Max Cutting deep 3mm
Cuts Per Minute 20000
Table Size 730X160mm
Fence Size 580X110mm
Dust collection port 60.5mm
Fence angle -45° to +45°
SAFETY INSTRUCTIONS
WARNING: When using electric tools, basic safety precautions, including the following, should always be
followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating
this product and save the instructions.
GENERAL
1. Read and understand manual.
For your own safety, read and understand the entire instruction manual before operating the lathe.
2. Read and understand warning label.
Read and understand the warning labels posted on the machine. Failure to comply with all of these labels
may cause serious injury.
3. Keep work area clean.
Cluttered areas and benches invite injuries.
4. Consider work area environment.
Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit.
Do not use power tools where there is risk to cause fire or explosion.
5. Guard against electric shock.
Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).
6. Keep children away.
Do not let visitors touch the tool or extension cord. All visitors should be kept away from work area.
7. Store idle tool.
When not in use, tools should be stored in a dry, high of locked up place, out of reach of children.
8. Do not force the tool.
It will do the job better and safer at rate for which it was intended.
9. Use the right tool.
Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes not
intended; for example, do not use circular saws to cut tree limbs or logs.
10. Dress properly.
Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid