3
WARNING: FAILURE TO FOLLOW THESE RULES
MAY RESULT IN SERIOUS PERSONAL INJURY
As with all machinery there are certain hazards involved with operation and use of the machine. Using the
machine with respect and caution will considerably lessen the possibility of personal injury. However, if
normal safety precautions are overlooked or ignored, personal injury to the operator may result.
This machine was designed f or certain applications only. We strongly recommend that this machine NOT be
modified and/or used for any application other than for which it was designed. If you have any questions
relative to its application DO NOT use the machine until you contact with us and we have advised you.
Your machine might not come with a power socket or plug. Before using this
machine, please do ask your local dealer to install the socket or plug on the
Power cable end.
2.SAFETY RULES FOR ALL TOOLS
A. USER:
(1).
WEAR PROPER APPAREL.
No loose clothing, gloves, rings, bracelets, or other jewelry to get caught
in moving parts.
Non-slip footwear is recommended. Wear protective hair covering to contain long hair.
(2).
ALWAYS WEAR EYE PROTECTION.
Refer to ANSLZ87.1 standard for appropriate
recommendations.
Also use face or dust mask if cutting operation is dusty.
(3).
DON'T OVERREACH.
Keep proper footing and balance at all times.
(4).
NEVER STAND ON TOOL.
Serious injury could occur if the tool is tipped or if the cutting tool is
accidentally contacted.
(5).
NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.
Don't leave tool until it
comes to a complete stop.
(6).
DRUGS, ALCOHOL, MEDICATION.
Do not operate tool while under the influence of drug, alcohol
or any medication.
(7).
MAKE SURE TOOL IS DISCONNECTED FROM POWER SUPPLY
. While motor is being
mounted, connected or reconnected.
(8).
ALWAYS
keep hands and fingers away from the blade.
(9).
STOP
the machine before removing chips.
(10).
SHUT- OFF
power and clean the BAND SAW and work area before leaving the machine.
(11
).DO NOT ALLOW
hands or
anything else.
to encroach on the cutting zone while the machine is
in operation.
B. USE OF MACHINE:
(1).
REMOVE ADJUSTING KEYS AND WRENCHES.
Form habit of checking to see that keys and
adjusting wrenches are removed from tool before turning it "on".
(2).
DON'T FORCE TOOL.
It will do the job better and be safer at the rate for which it was designed.
(3).
USE RIGHT TOOL.
Don't force tool or attachment to do a job for which it was not designed.
(4).
SECURE WORK.
Use clamps or a vise to hold work when practical. It's safer than using your hand
frees both hands to operate tool.
(5).
MAINTAIN TOOLS IN TOP CONDITION
. Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing accessories.
(6).
USE RECOMMENDED ACCESSORIES.
Consult the owner's manual for recommended accessories.
5
Instruction Manual for BS-13LS (B031)
30/03/2016
Summary of Contents for BS-13LS
