12
OPERATION MANUAL
1. Stand Assembly
r
Put down the machine on a timber (Fig. 3.3)
r
Attach the legs to band saw by using M6X10
socket head bolts and 6mm flat washers
r
Fix short braces and long braces to legs by using
M6x12 bolts, 6mm flat washers and M6 hex nut.
Do not tighten the nut at this time.
r
Stand the band saw on a level ground, then
tighten all bolts and nuts. (Fig. 3.4)
3.4 INSTALLATION
2. Assembling Table
After attaching the stand, mount the table
on the band saw, using the M6X10 hex head
bolts and 6mm flat washers.
Make sure the saw blade is in the centre of
table insert slot. (Fig. 3.5)
Fig. 3.3
Fig. 3.4
M6X10 socket head bolts
and 6mm flat washers
M6X12 carriage blots, 6mm
flat washers and M6 hex nut
Tighten nuts
3. Installing the Guide Rail.
Secure the guide rail with the four knobs to
the table. (Fig. 3.6)
Fig. 3.5
Fig. 3.6
M6X10 hex head
bolts and 6mm
flat washers
Guide rail
locking knobs
