16
OPERATION MANUAL
F
ig
. 4.10
F
ig
. 4.16
Using The 45° and 60° Stops
Move the swivel lock lever (Fig.4.12) to the right to
release the head, then swivel the head until the pointer
is on 60 . (Fig.4.16) The swivel head of the band-saw will
now be against the 60° stop (Fig.4.10) . Move the swivel
lock to the left to lock the head.(Fig.4.12) To set the head
using the 45° stop, flip the stop top plate over so that it
restricts the movement of the head to 45°. Check that
the scale reads 45° (Fig.4.17) To return the head for right
angle cuts, unlock the head by loosening the swivel lock.
Return the swivel head to the 0°and replace the 0° stop
pin making sure that the head is hard up against the
stop.(Fig.4.11) Move swivel lock lever to the left to lock
the head
To swivel the head to the right.
Move the swivel lock lever (Fig.4.12) to the right to re-
lease the head, then remove the 90° stop pin and swivel
the head to the desired angle. The maximum angle avail-
able in this direction is 60° set when the head is hard up
against the stop. (Fig.4.15)
Place the pointer of the scale at the angle required.
Move the swivel lock lever to the left to lock the head.
NOTE:
Please note that the scale (Fig.4.13) is for reference
only and if the angle is required to be very accurate then
the angle should be checked with a protractor after the
cut.
F
ig
. 4.13
F
ig
. 4.15
60° Stop
45° Stop
F
ig
. 4.14
0° Stop Pin
F
ig
. 4.17
Page 16
Instruction Manual for EB-280DSV (B063V)
10/04/2019
