10
Maintenance & Care
Starting up and operating
the unit:
Put down the handpiece in the
handpieceholder. Plug-in the plug.
Turn on the unit with button 6. With
button 3 and 5 you can adjust the
speed level. Regulary the drill runs
clockwise. To change the dircetion
push button 4. While the drill runs
with the left rotation the green LED
(no 2 in pic.1) is shining.
Clamping the tool/ bur
The handpiece is equipped with a
chuck, which can hold all burs with
a diameter of 2,35 mm (this is the
diameter usually used for tools in
podiatry). To open the chuck, push
the spanner forward with your
thumb and leave it there. Now insert
the tool as far as possible. Pull back
the knob and the tool will be firmly
clamped.
For
security
reasons,
only change the tool, if
the handpiece is turned
off.
Setting up the speed
Hold the handpiece (incl. tool) in
your hand or store it in the
handpiece holder attached to the
side of the control unit.
Switch on the unit with button (6).
Now you can also set the speed
with buttons (3) and (4), and choose
its direction of rotation with button
(5). In reverse running the LED (2)
will be on.
