hadewe SB2 Series, Manual

Page: 5 / 28

5
Safety Instructions
•
the inserted tool sits properly in the
chuck and will not cant/jam while
clamping it
•
the tool is approved for using it at
the max speed (see manufacturer´s
instructions), or only use the speed
required by the instrument
•
the tool is absolutely dry.
For safety reasons do not
change the tool while the mo-
tor is running.
Switch off the unit immediately
if
•
the bur comes off during the treat-
ment itself.
•
the motor blocks during the treat-
ment.
While doing any foot care, only
operate the unit with the suc-
tion turned on.
Only use the suction function,
if you have installed the suc-
tion filter. Check this filter
every 10 operating hours. If it is full,
please exchange it. A filter should be
exchanged at least after 50 operating
hours.
.
The light on the handpiece is
for lighting the area being
treated. Do not look directly
into the light.
Never use the suction to vac-
uum any liquids (or air/water
fog which contains particles of
liquids).
Always follow the operating
instructions.
Do not carry out any repairs,
modifications or maintenance work
yourself. This is only to be accom-
plished by an authorized specialist. The
mains cable may also only be changed
by the manufacturer, or an authorized
specialist. Maintenance records may be
supplied to repair workshops and
trained technicians upon request. Never
remove the housing, especially not
while the equipment is plugged into the
socket, since some components are
under electric voltage. Any unauthor-
ized or improper handling (e.g. trying to
repair the unit) of the equipment will
immediately
nullify the guaran-
tee/warranty, and any other liabilities of
the manufacturer.