www.haden.com 07
INSTALLATION WARNINGS
•
Ensure that the supply cord is not wedged during the installation. If
the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to prevent a
hazard.
•
While the oven door is open, do not let children climb on the door or
sit on it.
•
Do not operate the appliance before it is fully installed.
•
The appliance must be installed by an authorized technician.
•
The producer is not responsible for any damage that might be caused
by defective placement and installation by unauthorized people.
•
When you unpack the appliance, make sure that it has not been
damaged during transportation. In case of any defect; do not use the
appliance and contact a qualified service agent immediately.
•
The materials surrounding your appliance (cabinet) must be able to
withstand a temperature of min 100°C.
•
Before using for the first time, protective coatings applied during the
manufacturing process need to be burnt off. Fumes will be emitted
but this is normal. Ensure the room is well ventilated during the
burning off process. Avoid inhaling the fumes. For this reason, before
using your oven, run it empty at maximum temperature for 45
minutes. At the same time, you need to properly ventilate the
environment in which the product is installed.
•
During usage, the outer and inner surfaces of the oven get hot. While
opening the oven door, step back to avoid the hot steam coming out
of the oven.
•
Always use oven gloves to remove and replace food in the oven.
•
Always position pans over the centre of the cooking zone, and turn
the handles to a safe position so they cannot be knocked or grabbed.
•
Make sure the appliance control knobs are always in the "0" (off)
position when not in use.
