014
www.haden.com
ELECTRICAL CONNECTION
PREINSTALLED
LINKAGES
WARNING:
The cooker must be installed by a qualified electrician, in
accordance with all relevant British Standards/Codes of Practice (in
particular BS 7671), or with the relevant national and local regulations.
WARNING: THE APPLIANCE MUST BE EARTHED
•
Before connecting the appliance to the power supply, the voltage
rating of the appliance (stamped on the appliance identification plate)
must be checked for correspondence to the available mains supply
voltage, and the mains electric wiring should be checked to ensure it
is capable of handling the appliance’s power rating (also indicated on
the identification plate).
•
During installation, please ensure that isolated cables are used. An
incorrect connection could damage your appliance. If
the mains cable
is damaged and needs to be replaced this should be done by qualified
personnel.
•
Do not use adaptors, multiple sockets and/or extension leads.
•
The supply cord should be kept away from hot parts of the appliance
and must not be bent or compressed. Otherwise the cord may be
damaged, causing a short circuit.
•
If the appliance is not connected to the mains with a plug, a multi-pole
1
