Haden HB03001-US, Instruction Manual

Page: 9 / 48

5. Press the measuring cup into the lid as far as it goes.
6. Place the completely fi lled and closed blender jug with the handle
to the right on the motor unit. Make sure that the arrow on
the blender jug aligns to the arrow on the motor block. Turn
the blender slightly back and forth if it does not immediately sit
properly. The motor cannot start until the blender jug is fi tted fl ush
to the motor unit.
SELECTING THE SPEED SETTING
Once the blender jug is fi lled and sitting completely closed on the
motor unit, you can switch on the appliance.
Set the control dial to
• Level 1 – 3
for liquids or soft food, for mixing, blending and stirring
• Level 3 – 5
for more solid foods or for chopping
• Level P (pulse function)
for short, powerful impulse operation, e.g. for crushing ice cubes
or when cleaning. To prevent overloading the motor, the control dial
does not lock in this position. Therefore, hold the control dail in this
position for short periods only.
NOTE: Fill the blender jug with a maximum of 180g of ice cubes.
Otherwise, the ice cubes will not be crushed optimally.
NOTE: For each use, the consecutive operation time should be less
than 3 minutes. Then the unit needs at least 10 minutes rest time ,
before the next cycle, let the unit cool to room temperature before
performing the next operation cycle.
www.hadenusa.com
9