Haden DORCHESTER 201270, Instruction Manual

Page: 5 / 16

• The kettle will switch off automatically when the water has boiled.
You may switch the kettle off before the boiling process is complete
by using the on/off switch.
• After the kettle has switched off automatically, (or has been
switched off manually) it may need time to cool down. After 15-20
seconds, the kettle can be switched on again.
• Always take care when pouring boiling water and never tip the
kettle excessively.
• Should you need to refill the kettle after it has boiled, allow the
kettle to cool sufficiently before opening the lid.
• Place the kettle on a stable flat heat resistant surface.
• Ensure that the kettle is switched off before removing it from its
stand.
• Prevent children from pulling on the mains cord or knocking the
kettle
• Ensure that the mains lead does not overhang the worktop or come
into contact with hot surfaces and gas rings.
• Before cleaning the kettle disconnect from the power supply and
wait until it has cooled down.
• Only use the cord supplied with this kettle.
• The outside surface of the kettle may get hot during use, please
take care when using the kettle.
• Never fill the water over the maximum water level. Doing so may
cause the kettle to splash during the boiling cycle.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person.
• Never leave the Kettle unattended when in use.
www.haden.com
05