Haden 200037, Instruction Manual

Page: 7 / 16

05.
INSTALLATION
This appliance is designed to be free standing only. As such should not be
recesed or placed inside built-in cupboard covered with a door.
• For safe lifting, tilt the appliance backwards by no more than 45
degrees, hold the base and rear corners of cabinet. Lift the
appliance carefully.
• Never use the door handles for lifting.
• Do not apply force on any part such as condenser and door to
prevent the refrigerator from deforming, or else it will influence
its performance.
• Do not site in a location which is likely to drop below 16 degrees
centigrade, i.e. garage or shed in winter.
• Install the appliance on flat, firm ground to prevent vibration and
noise. Adjust the feet located at the front base of unit, to ensure
the item is level.
• Choose a dry and well-ventilated location. A space of no less than
7cm must be left around the chiller.
• Choose a location where there is no heat source. Keep the
appliance away from direct sunlight, radiators, heaters, ovens etc.
• Wipe all internal parts with warm water mixed with a gentle
cleaning solution and then rinse with clean water and then dry.
• Allow to stand for a minimum of 24 hours after moving and before
plugging in to mains.
• Once plugged in to the outlet allow 2-3 hours for the appliance to
cool to the required temperture before placing drinks inside.
THIS APPLIANCE MUST BE PLUGGED IN TO AN EARTHED SOCKET.
DO NOT USE AN EXTENSION REEL WITH THIS APPLIANCE.