5.52.290.00.01.08
21
13.2
Periodic checks
Independently from the regulations of the individual countries, lifting devices must be checked at least yearly
by a qualified person or licensed qualified person regarding its functional safety.
13.3
Wire rope
Adequate performance of the servicing and monitoring work acc. to the validated, national regulations
“Basics for cable drives – monitoring during use”.
A visual check must be effected before every new work shift.
Wear
Deformation
Fissures
Corrosion
Report any damage immediately to the responsible person and exchange damaged or worn wire ropes and
load tackles.
13.4
Inspection intervals
on commission-
ing
daily checks
1st service
after 3 months
inspection,
service every
2 months
inspection,
service every
3 months
inspection,
service every
12 months
inspection,
service every
24 months
Inspection of the equipment by a qualified person (periodic
inspection)
X
Check screw connections
X
X
Check brake function
X
X
check brake air gap (only for electric devices) *)
X
check overload protection if existent
X
clean and lubricate the wire rope
X
X
X
check wire rope and wire rope end fastenings for damage
and wear
X
check the load tackle and load hook for cracks and
deformation
X
*) not for EX design
check oil level of the lifting gear
X
X
lifting gear, oil change
X *)
Chain drive - the roller chain must be oiled
jeden Monat *)
Chain drive - the roller chain must be checked
X
*) see chapter "maintenance"
13.5
Roller chain
When dimension Hmin is reached, both chain wheels and the roller chain must be exchanged.
Wear elongation
kg
Type
t
5xt max.
H
H min.
500
08 B-1
12,7
64,77
11,8
11,21
1000
12 B-1
19,05
97,16
16,1
15,30
2000
RE 516
25,4
129,54
20,5
19,48
3200 + 5000
24 B-1
38,1
194,31
33,4
31,73
7500
32 B-1
50,8
259,08
42,2
40,09
10000
40 B-1
63,5
323,85
52,9
50,26
Illustration 24
13.5.1
Roller chain is damaged
CAUTION!
Please exchange the roller chain by a new, original roller chain if the following damage is found:
bolts are torn
Illustration 25
rigid chain links
(if the chain links do not align again straight after
going round the chain wheel)
Illustration 26
