![background image](http://html1.mh-extra.com/html/hacker/qst-150-25-v2/qst-150-25-v2_operating-manual_3275194030.webp)
Technical specifications
page 30 of 36
QSL-T/QST-150-25/45 V2
Standard
Original operating manual
Rev1.2
3.7
Performance limits
Brushless DC motors can be heavily overloaded for a short time. The power demand is only
limited by the self-heating of the motor and its temperature limits. (see3.8)
INFORMATION
The cooling of the motor has an enormous influence on its performance. Make sure there is
a sufficient supply of air and, if possible, mount the motor on a material with high thermal
conductivity in order to dissipate the generated heat more quickly.
Overview of performance limits
Turns
Type
Unit
4
5
6
7
8
9
10
11
12
Top performance
(30s)
kW
15
13
11
10
8
7,5
6,5
6
5,5
These values were determined in tests with good cooling and are only intended as a guide.
3.8
Load-, temperature- and rotational speed limits
The load, - temperature- and rotational speed limits are defined in the following table:
Type
Unit
Value
Axial load max.
(F
A
)
kN
0,7
Radial load max.
(F
R
)
kN
1,5
Temperature max.
°C
120
Rotational speed max.
U/min
5000
Selected force application point for
bearing service life calculation
3.9
Sensors
Temperature sensors:
Designation: PTC-1000 / Manufacturer: Alpha-Therm GmbH
Hall sensors:
Designation: A1214LUA-T / Manufacturer: Allegro MicroSystems, LLC
For technical data of the installed sensors, please refer to the datasheets of the respective
manufacturer