Parts reference list
Part no.
Name
10-1
Upper port (L) hull section
10-2
Connector
10-3
Connector
10-4
Torpedo upper half (2)
10-5
Torpedo lower half (2)
10-6
Propellers
10-7
Propeller shafts
Kit 10:
Two torpedoes
Half of each torpedo is equipped with a propeller, then joined to the remaining half.
Two connectors are added to a new hull plate, before it is attached to the main hull assembly.
AM
Screws
Ref
No.
Dimensions
AM
4+1
2 x 4 mm
CP
2+1
2 x 4 mm
CP
10-1
10-2
10-3
10-4
10-5
10-6
10-7
Place the upper half of the torpedo
10-4
onto the lower half
10-5
and gently press together. Have ready the torpedo tube assembly
from kit 9.
Place the upper half of the torpedo
10-4
onto the lower section
10-5
and gently press both parts together and hold in place until
the glue has dried.
Detach the two opposing propellers
10-6-1
and
10-6-2
from one of
the frames
10-6
. Connect these to form a propeller, using a shaft
10-7
. Make a second, identical propeller in the same way.
Insert a torpedo into each tube
9-1
and
9-2
as shown above. If
necessary, use fi ne sandpaper, or similar, to slightly reduce the size
of the fi ns on the torpedo.
Repeat the process for the second torpedo: fi t the propeller
10-6
into the lower section
10-5
and, as before, add glue to the pegs on
the upper half
10-4
.
Take one torpedo upper half
10-4
and one lower half
10-5
. Insert a
propeller
10-6
into the lower section
10-5
, so that the shaft
10-7
sits in the recess of the torpedo. Add a little glue to the three pegs
along the length of the upper section
10-4
as well as to the two
pegs near where the propeller sits (see arrows).
5
3
1
6
4
2
STAGE 1
Assembling the torpedos
10-6-1
10-7
10-6-2
10-6-1
10-7
10-4
10-5
10-6
10-5
10-4
10-6
10-5
10-4
10-5
10-4
9-2
9-1
10-5
Kit 10:
Two torpedoes
1
2
PACK_3 _UK.indd 10-11
02/08/2023 15:39
