ASSEMBLY ADVICE
ASSEMBLY ADVICE
Some parts of the model are attached using screws whilst some
simply push-fit together. Other parts will need to be glued in
place using superglue (Cyanoacrylate or CA). Always follow the
manufacturers guidelines and warnings, apply sparingly and use in a
well ventilated space. Superglue gel (thick superglue) can be applied
with pin-point accuracy to the relevant surface using a cocktail stick.
Where possible, parts should be test-fitted in place before glueing.
The instructions are numbered to indicate the correct order of
construction and also include tips and tricks to make the assembly
of the model as easy as possible.
To protect the paint finish on the components use a clean piece of
white paper on your work surface to build on.
Take care when opening the moulded packaging and try to leave
parts in their recesses until required to avoid losing pieces.
Always read through the instructions carefully and study the
illustrations before starting the assembly.
PB
1
A S S E M B L Y G U I D E
The first phase of the model’s assembly starts with the upper jaw,
which will become part of the Xenomorph’s skull.
K I T 1 : T H E U P P E R J AW
PARTS SUPPLIED
Ref.
Name
Qty.
1-1
Skull A
1
1-2
Upper Jaw A
1
1-3
Upper Jaw B
1
1-4
Upper Tooth 1 A
1
1-5
Upper Tooth 2 B
1
1-6
Upper Tooth 3 C
1
1-7
Upper Teeth 4 D
1
1-8
Upper Tooth 5 E
1
1-9
Upper Tooth 6 F
1
1-10 Upper Tooth 7 G
1
1-11 Screwdriver
1
1-12 Screws 2x6mm
4*
1-1
1-2
1-3
1-4
1-5
1-6
1-7
1-8
1-9
1-10
1-11
1-12
* A spare screw is also supplied in case of loss or damage.
