2
3
Take the Lower Jaw parts
2-1
and
2-2
. Note how the rectangular peg on
Jaw
2-2
fits into the matching recess
on Lower part
2-1
. Apply a little glue
in the recess and press the two parts
firmly together. Make sure the parts are
secured together before continuing.
K I T 2 : T H E L O W E R J A W
4
2-2
2-1
5
2-1
2-3
EXPERT ADVICE
EXPERT ADVICE
Protect painted parts from damage during
assembly by working on a cutting mat or a
sheet of cardboard. To clean components,
use a soft, dry cloth so as not to damage your
Xenomorph. Remove dust from intricate items
using a soft brush.
The Lower Lateral Jaw
2-3
is fitted to the left side of
the Jaw
2-1
. There are five
circular sockets on Jaw part
2-1
into which pegs on Jaw
2-3
fit. Jaw part
2-1
may
need to be bent slighty for
the pegs to align. As part
2-3
will need to be removed
in a later issue,
do not glue
in place
. If necessary, use a
small piece of masking tape
to temporarily hold the part
in place.
