Hach SIGMA 900, User Manual

Page: 57 / 94

Section 6
Page 57
8837prgwrk.fm
Volume Calibration Sheet
6.2 Volume Calibration Sheet
Name: Date: SN: ID#:
1. Auto Calibrate?
YES
or
NO
?
If
NO
then go to Step 4.
If
YES
then:
a. Ready to Pump?
Press the
YES/ENTER
key to begin pumping liquid into graduated cylinder.
2. Enter actual volume pumped: _____________________
3. Program continued at Step 15 in Main Sampler Program.
You must completely step through the Main Sampler Program until you reach step 18. You will see
SETUP
COMPLETE, READY TO START
. At that time, you will manually take a sample by pressing
TAKE SAMPLE
on
the keypad. The sample volume will be the desired amount.
4. Timed Calibrate?
YES
or
NO
?
If
NO
then:
Program continued at Step 14b in Main Sampler Program
If
YES
then:
Timed Calibrate - Ready to Pump?
Press
YES
key to begin pumping into the cylinder.
5. Stop at mark
Press the
STOP PUMP
key when liquid has reached the desired volume.
6. Try Again?
YES
or
NO
?
If
YES
then:
Another sample cycle will begin.
If
NO
then:
Program continued at Step 15 in Main Sampler Program