Installation
Install the instrument
D A N G E R
Multiple hazards. Only qualified personnel must conduct the tasks described in this section of the
document.
W A R N I N G
Chemical exposure hazard. Obey laboratory safety procedures and wear all of the personal protective
equipment appropriate to the chemicals that are handled. Refer to the current safety data sheets
(MSDS/SDS) for safety protocols.
Make sure that the power lines are de-energized before installation.
Note: To make sure that safety and proper performance do not have electro-magnetic disturbances, DC power for
the instrument must be derived from Hach power supply (230-300-0001) or directly from the equipment that is
monitored by this instrument.
Items to collect:
• Hardware to attach the instrument
Attach the mounting plate to a wall or other permanent fixture. Refer to
Figure 3
.
Figure 3 Instrument dimensions
Install the sample hoses
W A R N I N G
Personal injury hazard. Enclosed systems contain high pressure. Qualified personnel must remove
pressure from the system before the instrument can be installed or removed.
English
7