Hach CD300, User Manual

Page: 19 / 140

Table 7 Wiring information—Analog outputs and external trigger (CON2)
Pin Description
1 Output 1 +
2 Output 1 – GND
3 Output 2 +
4 Output 2 – GND
User interface and navigation
Display overview
N O T I C E
Do not use writing tips of pens or pencils or other sharp objects to make selections on the screen or damage to
the screen will occur.
Use fingers or a touch screen pen to operate the touch screen of the CD300 controller. The main
screen and the control elements can be configured individually.
Note: Do the CD300 configuration settings in Service mode only.
Figure 8 Display overview
1 Date and time 3 Navigation bar (refer to Table 8 )
2 Current mode
Table 8 Navigation bar description
Icon Description
Shows the left and right COM ports and sensors. To change the settings, push the COM button. To
search for a sensor, push Scan .
Shows the different pages.
To change the page, sweep to the side.
To edit a page, push the display to get a yellow frame.
To add a new page, push the display for three seconds.
Refer to the user manual.
English 19