Hach 8362sc, User Manual

Page: 44 / 58

44
sc1000 Operation
7. Press
ENTER
when stable. A screen will display 1 Point Auto Complete and the slope
(XX.X mV/pH).
8. Return the probe to process.
5.7.4 Two Point Manual Calibration Method
1. Tap the bottom-left of the screen to display the pop-up toolbar and press
MAIN MENU
.
2. From the Main Menu, select SENSOR SETUP and press
ENTER
.
3. Select the appropriate sensor if more than one is attached and press
ENTER
.
4. Select CALIBRATE and press
ENTER
.
5. Select 2 POINT MANUAL CAL and tap the dark-blue highlighted area to the far-right.
Select the available Output Mode (Active, Hold, or Transfer) from the list box and
press
ENTER
.
6. Move the clean probe to Solution 1 and press
ENTER
to confirm.
7. Press enter when stable. Edit the solution value using the keypad and press
ENTER
.
8. Move probe to solution 1 and press
ENTER
.
9. Press enter when stable. Edit the solution value using the keypad and press
ENTER
.
10. A screen will display 2 Point Manual Cal Complete and the slope (XX.X mV/pH).
11. Return the probe to process.
5.7.5 One Point Manual Calibration Method
1. Tap the bottom-left of the screen to display the pop-up toolbar and press
MAIN MENU
.
2. From the Main Menu, select SENSOR SETUP and press
ENTER
.
3. Select the appropriate sensor if more than one is attached and press
ENTER
.
4. Select CALIBRATE and press
ENTER
.
5. Select 1 POINT MANUAL and tap the dark-blue highlighted area to the far-right.
Select the available Output Mode (Active, Hold, or Transfer) from the list box and
press
ENTER
.
6. Move the clean probe to solution and press
ENTER
to continue.
7. Press enter when stable. Edit the solution value using the keypad and press
ENTER
.
8. Press
ENTER
when stable. A screen will display 1 Point Manual Complete and the
slope (XX.X mV/pH).
9. Return the probe to process.