Hach 8362sc, User Manual

Page: 36 / 58

36
sc1000 Operation
Figure 13 List Box
Figure 14 Message window
5.2 Sensor Setup
When a sensor is initially installed, the serial number of the sensor be displayed as the
sensor name. To change the sensor name refer to the following instructions:
1. Tap the bottom-left of the screen to display the pop-up toolbar and press
MAIN MENU
.
2. From the Main Menu, select SENSOR SETUP and press
ENTER
.
3. Highlight the appropriate sensor if more than one sensor is attached and press
ENTER
.
4. Select CONFIGURE and press
ENTER
.
5. Select EDIT NAME and tap on the dark-blue highlighted area to the far-right. Use the
keypad to edit the name. Press
ENTER
to confirm or Cancel to return to the Sensor
Setup menu.
1. Scrolls up or down
2.
CANCEL
–cancels and entry.
3.
ENTER
–confirms a selection.
1. Scrolls up or down.
2. Displays the messages or warnings.
3. Displays details on the selected entry.
4. This button changes back to the previous display.
5.
ENTER
–confirms an entry.
6.
CANCEL
–cancels an entry.
mg/l
g/l
ppm
mE
E
m-1
FNU
NTU
1
2
3
5
6
2
COMMUNICATION ERROR
Ph [11f20030007]
1 3 4