Hach 5740sc, User Manual, Page: 15 / 50

15
sc100 Operation
4.2 Sensor Setup
When a sensor is initially installed, the serial number of the sensor will be displayed as the
sensor name. To change the sensor name refer to the following instructions:
4.2.2 Sensor Data Log
The data logs store the measurement data at selected intervals. The data logs are stored
in a packed binary format and the event logs are stored in a CSV format. The logs can be
downloaded through the digital network port, service port, or the IrDA port. DataCom is
needed for downloading logs to a computer.
4.2.1 Changing the Sensor Name
Step Select Menu Level/Instructions Confirm
1 MAIN MENU —
2 SENSOR SETUP
3 Highlight the appropriate sensor if more than one sensor is attached.
4 CONFIGURE
5 EDIT NAME
6
Select character to edit (shown in brackets). —
Scroll to appropriate character.
4.2.2.1 Sensor Data Logging
Step Select Menu Level/Instructions Confirm
1 MAIN MENU —
2 SENSOR SETUP
3 CONFIGURE
2 LOG SETUP
4 SENSOR INTERVAL
2 Scroll through the displayed options.
4 TEMP INTERVAL
2 Scroll through the displayed options.
5 SET INTERVAL
客服：400 688 9809