Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
2
MA 5102-UK b
MA 5102-UK b
Teile-Nr. 01/0117000215
2.2 Assembly on fall arrest rails
Model 0630.6603 Rest platform Model
0630.1904 (Fig. 3)
Push the T-bolts from the front through the two
outer holes on the rest platform, attach a washer
to each from behind and screw on a nut (Fig. 5).
Enough thread should protrude from the nut to en-
able it to be gripped. Place the folding rest platform
at the desired ladder height. Move the two foot
rests past the ladder from behind, fold forwards and
rest on the rung of the ladder. Now insert the T-
bolt into the groove of the Vario Rail and twist
clockwise horizontally to the stringer. The marking
at the end of the thread indicates the position of
the bolt head.
The rest platform is now screwed on. The rest plat-
form must be so aligned that the foot rests are ho-
rizontal (Fig. 3).
Care must be taken to ensure that a fastening
clamp is additionally fixed directly on the rung to
which the rest platform has been secured.
2.3 Assembly on single rail ladder Model
5442.03 Rest platform Model 0544.1904
(Fig. 6)
Place the folding rest platform at the desired ladder
height. Move the two foot rests past the ladder
from behind, fold forwards and rest on the rung of
the ladder.
Push the hex bolts from the front through the slots
on the fall arrest rail into the two outer holes of the
rest platform and assemble and tighten using the
washers and nuts (Fig. 7).
The rest platform must be so aligned that the foot
rests are horizontal (Fig.6)
Fig. 5
Washer
Fig. 4
Nuts
Washer
Counter plate
Connector
Fall arrest rail
Bracket screw
special HACA
nut
Washer
T-bolt
Fall arrest rail
Fig. 6
Fig. 7
Fall arrest rail
Special HACA
nut
HexT-bolt
