V. OPERATION
1.
Table height adjustment
.
Put the unfolded table on an even and hard
surface from the reverse position (upholstery
down). Remove the securing screws and then
adjust each of the 3 pairs of feet to the correct
height. Retighten the locking screw after
adjustment.
Note: Make sure the feet lock securely before
turning the table back into the working position.
2.
Headrest height and angle adjustment.
Using the prepared adjustment holes in the
headrest support sleeve, adjust the appropriate
height by inserting or extending the pin. After
obtaining the required position, lock.
3.
Paper roll holder and cutter.
Feed the paper through the face cushion while
making sure that the paper is fed under the rod
between the cushions. Close the paper cutter
over the paper and tear off the excess paper.
4.
Using the drop function.
Before starting the drop techniques, lay the patient on his stomach, make sure that the patient's position is
safe, all belaying elements have been adjusted to the patient's anatomy.
The technique should be performed only by qualified personnel, improper execution of the technique may
result in permanent injury to the patient.
8
