I.
APPLICATION
The stationary massage tables HABYS Agila
enable the physiotherapists correct, safe
and
effective conduct of rehabilitation treatments,
physiotherapy, physical therapy, massage,
aiming
at treating or alleviating the course of illnesses and the results of injuries /impairments.
The construction of the rehabilitation tables Agila enables an easy and
complete access to the
patient from each side.
II.
INSTALLATION
1.
Unfolding
•
Unfold the table
.
•
Check whether it has not been damaged during transportation. Should the table be damaged,
do not install the table and inform the seller immediately.
2.
Connection to the power
supply
Before inserting the plug into the
power
socket,
make sure that:
•
the socket is properly grounded and complies with the binding regulations;
•
the socket may sustain a load of the maximum power output of the device, given in the chart
of the Technical Data;
•
the voltage of the electrical power is in accordance with the data given in the chart of the
Technical Data;
•
the plug fits into the socket. Otherwise the socket needs to be replaced.
!
ź
Do not install the devices in the open air.
ź
Electric actuators may work no longer than 2 minutes.
ź
Restart is possible after 18 minutes of rest.
ź
After installation of the table the power socket should be easily accessible.
ź
Do not use the extension cords.
ź
The cable should not be bent.
ź
The cable of the power supply may be replaced only by an authorised
specialist.
ź
Independent repairs of the electric actuators cannot be performed.
ź
Avoid direct sunlight, UV radiations, rain, extensive dust, moisture.
Attention!
The manufacturer declines all responsibility if the user doesn’t follow the above
mentioned rules.
EN
7
