4
HTM-01 Base Module Installation
•
Mount the Base Module:
Using the double-sided adhesive backing on
the Base Module mount it to a convenient location on the appliance.
Avoid mounting the HTM-01 Base Module in locations near line
voltage power conduits.
DO NOT
locate the Base Module in locations where exposure to
water or dirt/grease are likely.
DO NOT
mount the Base Module in locations where temperatures
may exceed 104°F (40°C).
For best results, assure that the harness is long enough to
reach the intended location before mounting the base module.
•
Wire the Base Module:
Using the Base Module Wiring Harness
provided, wire the Base Module to the appliance. Choose the
appropriate wiring diagram from
Appendix A
based on: System Type,
Heating/Cooling Stages and Fan Speeds.
Double-sided
Adhesive
Status LED
PAIR Button
RJ-45 HTZ-01
Connector
Water Leak Sensor
Cable Connection
Wiring Harness
Connection