6
LCD Display
– See preceding pages for detailed descriptions of the
display icons.
– Increase or Decrease the target temperature set point.
Changing the target set point:
• Press the
or
button while in Auto, Heat or Cool Modes.
• If a schedule is programmed, “Override” is displayed below the
time indicating that the current target setpoint will be maintained
until the:
- Next schedule period
- Set point is changed to the scheduled value
- Mode button is held for 3 seconds, displaying “Schedule”,
“Perm. Override”
- To change the temperature units between °F and °C, simultaneously
press the
and
buttons briefly.
Mode
– Cycle through Operation modes:
Fan
– Cycle through desired Fan Speeds.
Manual Reset
– Reboots the thermostat system only.
To save energy, the display will turn off after a period of inactivity.
Before making changes, press any button to activate the display,
illuminating the screen.
5
1
2
3
4
